BEHA 9061, Инструкция по эксплуатации

Страница: 34 / 108

3.1 Appropriate Usage
The instrument may only be used under those
conditions and for those purposes for which it
was built.
When modifying or changing the instrument,
the operational safety is no longer guaranteed.
The opening of the instrument for fuse re-
placement, for example, may only be carried
out by professionals. Prior to opening, the in-
strument has to be switched off and discon-
nected from any voltages.
Any maintenance and calibration tasks may
only be carried out by our repair service staff.
The instrument may not be operated if the bat-
tery case is open.
If the instrument is subjected to an extremely
high electro-magnetic field, its functioning
ability may be impaired.
4.0 Display / Operation Elements
Display
Attention, warning symbol
Symbol “Limit” (Limitvalue)
Excess (breech) of contact voltage limit
Socket error
Battery status indication
Unit display
Display for selective RCD
Phase position nominal residual current
Contact voltage limit
Current type
Selected nominal residual current
Nominal residual current -
multiplication factor
Symbol for memory entry
Measurement data display
Symbol for ramp function
Temperature overload, overheating of the
instrument
AC voltage, display of mains voltage
Operation Elements
LCD
Key "VC/UL" to select contact voltage limit
Nominal residual current selection
PE contact electrode
Key "Start"
Key "Current Type"
Key "Phase Position" for nominal residual
current
Key "Store
Key "Send"
Key "Clear"
Battery case (instrument rear)
Infrared RS232 PC interface
Key - "Multiplication Factor" for nominal resi-
dual current
Function selection switch
Display key to select individual measurement
results
31
30
29
28
27
26
25
24
23
22
21
20
19
32
18
8
7
6
5
4
3
9
10
11
12
13
14
15
16
17
2
1
34
Display / Operation Elements
PTDB90610009.qxd:PTDB9061-02.qxd 14.08.2007 8:43 Uhr Seite 34