BEHA 2100D, Руководство пользователя

Страница: 25 / 28

9
Rotary field Detection
Voltage range
340…440 V AC phase
to phase
frequency range 47 Hz…63 Hz
LED indication Red LED
General Specifications
operating
temperature
range
-15°C to +55°C
Storage
temperature
range
-15°C to +55°C
Humidity Max. 95% RH
operating
altitude
Up to 2000 m
Measurement
category CAT IV 600V,
CAT III 690V
Pollution degree 2
IP Protection IP 64
Safety
regulations
EN 61243-3:2010
Agency approval
GS from TÜV
Rheinland, CE
Power Supply
2x 1.5V (AAA/ IEC
LR03)
Power
consumption
Approximately 60 mA
Battery lifetime
More than 10000
measurements
(<5 s / per measurement)
Dimensions
(HxWxD)
Approximately 280 x
78 x 35 mm (11.0 x 3.1
x 1.4 in)
Weight
Approximately 320 g
(0.71 lb)
MAInTEnAncE AnD REPAIR
According to the operating instructions the
voltage testers do not require any special
maintenance for operation. However, if a
malfunction occurs during operation, the
measurement has to be stopped and a
further measurement is not allowed. The
unit has to be tested at our factory service
department. Except for the replacement of
the battery, repair of the instrument should
be performed only by an Authorized Service
Center or by other qualified instrument
service personnel.
W
If the instrument is not used for a
prolonged period, the batteries must be
removed, as leaking batteries may be
hazardous and cause damages.
cleaning
Before cleaning, disconnect the voltage
testers from all measuring circuits. If the
instruments have become dirty due to daily
use, they can be cleaned with a damp cloth
and a little mild household detergent.
Never use aggressive detergents or solvents
for cleaning. After cleaning, do not use the
instrument until it is completely dry.