background image

ASSEMBLY & SETUP 

Assembling the 
SS-3300/SS-3200 
with Tripod 

Skip to step 5 (5w if wireless) if not using a tripod. 

 

 

Loosen knob and extend tripod legs to a stable 
position. Tighten knob securely to hold legs in 
place.

 

 

Lift display module and insert tripod pole into the 
hole on the bottom of the display.

 

 

Before raising tripod, loosen small knob adjacent 
to the crank.  

Raise the scoreboard by turning the 

crank on the tripod clockwise. To lower, turn crank 
counter-clockwise. 

Do not raise tripod past red 

MAXIMUM mark on the pole.

 

 

Tighten knob adjacent to the crank to securely hold 
the scoreboard in place. 

 

 

If the power cable and control cable are not 
attached to the bottom of the display module, 
connect both cables to the receptacles located in 
the recessed area.  Tighten screws on the 25-pin 
cable to secure to display module.

 

 

Connect the 25 ft. control cable to socket on the 
left side of the control console.  Tighten screws to 
secure cable to control console. 

 

Plug 8 ft. power cable into a standard wall outlet. 
An extension cord may be used. 

 

       If the power cable is not attached to the bottom of 

the display module, connect the cable to the 
receptacle located in the recessed area.  

       Screw antenna into the right side of the control 

console.  Plug the “barrel” end of the transformer 
into the left side of the console. 

       Plug display power cable and the control console 

transformer cable into standard wall outlets.  
Extension cords may be required to reach outlets. 

        

 

 

Place connection cables in a location away from 
high-traffic areas. Tape down loose cables in all 
traffic areas. 

 

The scoreboard may not function correctly if it 
receives a strong static shock.  Take care when 
using the scoreboard on high-static surfaces such 
as artificial grass or carpet. 

 

Control console and display module contain 
delicate electronic components; do not drop, bang 
into walls, doors, etc. as damage to your 
equipment may result. 


 5 

Assembling the 
SS-3300/SS-3200 
CABLED Model 
without Tripod 

Precautions 

Assembling the 
 SS-3300W/SS-3200W 
WIRELESS Model 
without Tripod 

 

5

w

 

6

w

 

7

w

 

Содержание Edge SS-3200

















Отзывы: