BEFCO TILL-RITE T60-266, Руководство оператора

Страница: 13 / 52

To assemble and setup the tiller for initial operation proceed as follows:
1. Lower the stand to support the tiller
(see fig. 4) . Secure it in place with the locking
pin.
2. Disassemble top and sides of the crate. Cut wires holding driveline. Leave machine
banded to pallet as long as possible to avoid tipping over during assembly.
3. Loosen bolts holding upper hitch in place in the shipping position.
4. Bolt the hitch together
(see fig. 3) , and bolt it to the tiller.
5. Ensure the breather plug (see #2, fig. 4) is screwed into the chain case (see #3, fig.
4) . Check the gearbox oil level (see #1, fig. 5) . It should be between ½ and
2
/
3
full.
Use SAE 90 wt. gear oil.
O
PERATION
13
BEFCO
T
ILL
-R
ITE
T60 O
PERATOR
’
S
M
ANUAL
Fig. 4
1
2
3
1. tiller stand
2. breather plug
3. chain case
4
4. rear shield
5. stand support
6. locking pin
6
5
1
2
3
4
5
Fig. 5
1. gearbox
2. locking clamps
3. sliding frame
4. side plate shield bolt
5. telescopic shield