BEFCO DR0-330, Руководство оператора

Страница: 12 / 56

3.02 - Set Up
Notice to dealer: Pre-delivery setup and service including lubrication is the
responsibility of the authorized dealer. It is up to him to assure that the machine is in
perfect condition and ready to be used. It is his responsibility to ensure that the
customer is aware of all safety aspects and operational procedures for the tedder. He
must also fill out the Pre-Delivery Checklist
3
prior to delivering the tedder.
3.03 - Assembly Instructions
12 12 Nut ES M14-2.00 Z TN
4 4 Bolt SH M14-2.00x25 Z F
8 8 Bolt HH M14-2.00x40 Z F
1 1 Tine arm wrench
4 4 Nut ES M12-1.75 Z TK
4 4 Bolt HH M12-1.75x50 Z F
2 2 Plate guard
2 2 Nut ES M16-2.00 Z TN
2 2 Inner wheel cover
2 2 Outer wheel cover
1 1 Breather cap, gearbox
1 1 Hose clamp
1 1 PTO protection guard
Hardware bag contains the following:
2 2 Safety guard (attached before shipment)
- 1 Driveline B2x1000 LW2
1 - Driveline B2x1300 LW2
2 2 Wheel Ø15x600-6
6 6 Right tine arms with attached tines
6 6 Left tine arms with attached tines
1 - Pull type drawbar assembly
- 1 Three point hitch carrier assembly
1 1 Main frame with gearbox and wheel spindles
Model DRP-330 Qty. Model DR0-330 Qty. Description
Each unit is shipped in a crate as a kit that consists of the following:
Note: All hardware needed for assembly will be found in the crate, in the hardware bag
or on the machine. Assembly will be easier if all parts are loosely assembled before
tightening the hardware.
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire. They
often have extremely sharp edges and cut very easily.
To assemble the machine proceed as follows:
Using a hoist, lift the machine approximately 6” from the ground to assemble the
wheels. Place the inner cover, the wheel and the outer cover on the wheel shaft and
tighten using the M16 elastic stop nuts
(see fig. 3) .
O
PERATION
12
BEFCO
R
OTARY
T
EDDERS
O
PERATOR
’
S
M
ANUAL
3
See Chapter 7 - Pre-Delivery Checklist.