BEFCO DR0-330, Руководство оператора

Страница: 13 / 56

On tedder model DR0-330, attach the three point hitch carrier assembly to the frame
using two bolts M14x30 in the top brackets and two bolts M14x60 in the bottom
brackets
(see fig. 4) . Tighten bolts using elastic stop nuts M14 then lay the machine on
the ground.
On tedder model DRP-330, assemble the pull type hitch by lining up the lower hitch
yokes with holes in the drive tube and secure them using the supplied M14x90 bolts and
M14 elastic stop nuts. Attach the turnbuckle to the left drive tube, secure it in place with
the bolt M14x70 and the M14 elastic stop nut.
Adjust the rotary tedder’s working height by turning the handle on the turnbuckle until
the tines are barely touching the ground
(see #1, fig. 5) .
O
PERATION
13
BEFCO
R
OTARY
T
EDDERS
O
PERATOR
’
S
M
ANUAL
Fig. 3 - Wheel assembly.
nut M16
outer cover
inner cover
Fig. 4 - DR0-330 Three point hitch.