24. Pass diagonally through sharp dips and avoid sharp drops to prevent “hanging up”
towing vehicle and mower.
25. Avoid sudden starts and stops while traveling up or downhill.
26. Always cut down slopes; never across the face. Avoid operation on steep slopes.
Slow down on sharp turns and slopes to prevent tipping and/or loss of control.
3.02 - Set Up
Notice to dealer:
Pre-delivery setup and service including lubrication is the
responsibility of the authorized dealer. It is up to him to assure that the machine is in
perfect condition and ready to be used. It is his responsibility to ensure that the
customer is aware of all safety aspects and operational procedures for the mower and
the engine. He must also fill out the Pre-Delivery Checklist
3
prior to delivering the
mower.
CAUTION: Stand clear of bands when cutting as they could be under sufficient
tension to cause them to fly loose. Take care in removing bands and wire, they
often have extremely sharp edges and cut very easily.
3.03 - Cutting Height Adjustment
WARNING: Keep hands and feet away from moving blades.
Be sure both towing vehicle engine and mower engine are off, spark plug wire is
disconnected, parking brake is locked, and key is removed before making any
adjustments.
Before working under mower install blocks or stands under the deck to prevent it
from falling.
The cutting height is the distance from the blades to the ground. The cutting height is
adjusted by
moving the spacers on the wheel yokes
.
Placing spacers between the
wheel arm and the wheel yoke raises the cutting height by the size of the spacer.
Removing the spacers lowers it by the same height
(see fig. 3)
.
Be sure all wheel arms are adjusted equally. This is the only way to ensure a completely
uniform cut.
The cutting height is adjustable from 1” to 4”.
Cutting lower than 2”
under most circumstances should be avoided.
IMPORTANT: Very low cutting heights should be avoided. Damaging shock loads
occur when the blades strike the ground repeatedly. This can cause damage to
the mower.
O
PERATION
11
BEFCO
C
YCLONE
O
PERATOR
’
S
M
ANUAL
3
See Chapter 7 - Pre-Delivery Checklist.
Содержание CYCLONE C30-CE5
