1.
Lubricate the wheel yokes:
Apply two or three shots of grease to the wheel arm
grease fittings
(see fig. 5).
2. Engine oil level:
Add oil as necessary. See the engine manufacturer’s operator’s
manual for further information on engine.
Every 25 hours: Check hardware tightness;
mower vibrations can loosen bolts.
Check tightness of the hardware periodically, using Table 1 as a guide
10
.
Every 50 hours:
1. Lubricate the three spindles with two or three shots of multipurpose grease
(see fig.
6)
. The top grease fittings are easily accessible from the top of the deck by simply
removing the plastic dust guards.
2. Check belt tension
11
.
4.03 - Blade Maintenance
WARNING: To avoid possible injury always wear proper eye and hand protection
when servicing mower blade.
In order for the mower to work properly and to always obtain a precision cut, proper
blade maintenance is important.
Blades must be kept sharp, at their original length and corners maintained. A blade
must be replaced if, due to wear or damage, its original shape has been distorted.
Installing or removing blades
If the mower blades need to be installed, do the following:
M
AINTENANCE
20
BEFCO
C
YCLONE
O
PERATOR
’
S
M
ANUAL
11
See Section 4.04 - Belt Tension.
10
See Table 1, Torque Specifications, page 25.
Fig. 6
Lubrication of the spindle
shafts easily accessible from
the top of the deck.
Содержание CYCLONE C30-CE5
