K I C K A L L
P O W E R & I N T R O
P O W E R I N G T H E
M O D U L E
U S E R M A N U A L
T H A N K S F O R P U R C H A S I N G A M O D U L E F R O M B E F A C O !
B E F O R E Y O U P L U G T H I S M O D U L E I N . . .
1.
Disconnect your cabinet from the mains.
2.
Triple check the power cord polarity.
The coloured line on the cable
(pin number one) is the -12V rail.
3. If you plug the module backwards you might burn it out and
unfortunately this is not covered by the warranty.
4. If you have any questions about this product please send them to:
I N T R O D U C T I O N
K I C K A L L
Kickall is an analog bassdrum module capable of generate a vast palette of kick sounds as well as others like
percussions or basslines. The module can also track with precise V/Oct scalling via its Tune input allowing you
to fit your kicks in the mix perfectly.
M O D U L E
R E F E R E N C E
P A N E L O V E R V I E W
1.
Volume Input
Voltage Control Input of the internal
VCA. Range: 0-10V.
2.
Trigg
Input
This input trigs the internal VCA
Envelope. Input thresold: 3,5V
3.
Out
Main Output of the module.
4.
Tune
This knob controls the tune of the
sound around the first two octaves.
5.
Trigg Button
Manual trigger for the internal VCA
envelope.
6.
Shape
This control morphs the signal
waveform from sine to square
.1
7.
Time
Manual control for the Pitch Envelope
decay time
8.
Bend
This knob acts as attenuator for the
Pitch Envelope.
9.
Decay
Manual control for the VCA Envelope
decay time.
10.
Tune
Input
Voltage Control Input for Oscillator
tune. It tracks on V/Oct standard up
to ten octaves.
11.
Shape Input
Voltage Control Input of Shape
parameter. Range: 0-10V.
12.
Decay Input
Voltage Control Input of Decay
parameter. Range: +/-10V.
All manuals and user guides at all-guides.com
