Befaco CV Thing, Инструкция по сборке

Страница: 2 / 9

CV Thing v1 - ASSEMBLY GUIDE rev. Aug 2021
IC SOCKETS
First we will place the sockets (taking care to orientate them properly – the notch on one
end of the socket should match the silkscreen) and solder them into their correct positions.
Get them from ICs bag.
Qty Value
Name on PCB
1 DIL8 IC1
1 DIL16 IC2
CAPACITORS
Identifying capacitors can be quite tricky. Codes stated are indicative, please take a look at
this guide for help identifying capacitors:
http://www.wikihow.com/Read-a-Capacitor
Qty Value Code Name on PCB
10 100n 104 C1, C2, C3, C5, C6, C7, C8, C9, C11, C12
3 10uF ( POLARIZED! ) 10uF C10, C13, C14
1 22p 220 C4
REGULATORS
Make sure it is positioned correctly with reference to the silkscreen outline on the PCB
Qty Code
Name on PCB
1 AMSR 78L05 5V_REG
1 LM4040 REG-1
OPEN BAG B
POWER CONNECTOR
Solder the power connector at “JP6”, ensuring the position is correct: it must be placed over
the silkscreen marking with the pins facing the edge of the PCB.
This is a good moment to split both Boards apart. Use pliers to help you and make
sure to carefully remove the locating tabs.
2