5
Smart Target
1. Power On/Off button
2. Lives indicator LEDs
3. 3 x AAA batteries slot
1.4. Product Specification
Helicopter Specifications
Target Specifications
2. INITIAL SETTINGS
2.1. Battery Charge
- Make sure the Helicopter is switched OFF
- Plug the USB cable into the USB port on your PC: the
light at the USB charger end is lightening.
- Connect the USB cable end to the charging socket
located underneath the helicopter. Do not force, the
cable end should connect smoothly.
- During the charging process, the USB charger light
will turn off; if the light turns on again, it means the
helicopter is fully charged.
ENGLISH
1
1
5
4
2
3
1
2
3
BLUETOOTH CHIP
Bluetooth 3.0
BLUETOOTH RANGE
Class 2, up to 10 m
PROTOCOL
SPP Serial Profile
BATTERY
Lithium Polymer 180 mAH
TYPICAL USE TIME
Up to 8 minutes continuous
CHARGE TIME
Up to 40 minutes
SERVO CONTROLS
3 ch gyroscope
IR SENSORS
1 TX (3 m range), 1 RX
DIMENSIONS
L 200 mm x H100 mm x W140 mm
WEIGHT
45 g
IR SENSORS
1 TX, 1 RX
TX RANGE
Minimum 3 m
TX RADIUS
+/- 30°
BATTERY
3 X AAA cells (not included)
DIMENSIONS
D 76 mm x H 30 mm
WEIGHT
40 g
