Beeverycreative Hello BEE Prusa, Инструкция по сборке

Страница: 8 / 67

SAFETY INFORMATION
Even though the helloBEEprusa 3D printer was designed to be as safe as possible,
we would like to remind you it was conceived to be used by adults.
Still, there are safety concerns you must keep in mind:
Other information you need to know
After assembling your helloBEEprusa, don’t drop/knock/damage it and don’t connect it to anything
that hasn’t been previously validated by BEEVERYCREATIVE.
Make sure gases, explosive and other flammable materials aren’t kept, stored or transported
with your helloBEEprusa 3D printer or its parts.
ADULT SUPERVISION
COOL AND WELL-VENTILATED
ENVIRONMENT
MOVING PARTS
HIGH TEMPERATURES
For better results with helloBEEprusa,
it is recommended you maintain an acceptable level
of air quality around the printer.
Environments with some ventilation are also recommended
so as to renew the air if you choose to print
with materials that release odors.
Because we can’t stress this enough,
helloBEEprusa was developed to be used by adults.
Should you wish that children also use it,
you must supervise them at all times while they do so.
You must also take great care with small printed objects,
because children might try to swallow them,
which poses a danger of them choking.
Whenever helloBEEprusa is functioning,
some mechanical parts can reach high temperatures,
which can cause serious burns if touched.
For that reason you must always be careful
not to touch it.
Whenever it’s functioning,
helloBEEprusa has moving parts.
For that reason, you should always keep a safe distance
from the printer while it’s operating.