![Beeper iVELO Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/beeper/ivelo/ivelo_installation-and-use-manual_2720478016.webp)
->
Press on to activate the mode
(L0)
LED DISPLAY
16
The iVELO is equipped with a bill-poster LED with tactile orders. Here how to use your
bill-poster in depth.
1. Detail of the functions
2. Detail of the dysfunctions
Speed
Battery level
Total mileage
Functions
Classic pedaling mode
Front light
Bluetooth connection
Alert indication
Front light indication of lighting
Low speed mode (weak battery)
In the event of problem on the iVELO, the picto appears on
the bill-poster and an alarm resounds. An error code is displayed
then instead of mileage.
Err01 :
Motor fault
Err02 :
Right throttle lever fault
Err03 :
Left brake lever fault
Err08 :
Weak battery
Err10 :
Bad connection
Err11 :
Controller problem
If one of these errors appears, please contact our engineering
service.
LEARNING
The iVELO has 3 using modes:
Mode 1:
Pedaling without electric assistance
Mode 2:
pedaling with electric assistance
Mode 3:
100% electric (without pedaling)
->
Press on to activate the mode
(L1 or L2)
->
Use the accelerator located on the handlebar (right trigger)
->
Note:
In mode 1 and mode 2, use only the pedals and not the manual accelerator.
ON/OFF
(long pressure 2 seconds)
Electric Assistance mode:
The electric
assistance is automatically launched when
speed reaches 2 km/h.
100% electric mode:
The iVelo starts
automatically while pressing on the right
trigger.
To slow down, apply in priority the left manual
break.
Err04 :
Motor blocking