Beem Multi-FiXX 1300, Руководство пользователя

Страница: 21 / 50

BEEM - Elements of Lifestyle EN 17
Store the appliance and all accessory parts
at a dry, clean and frost-free location, which
is protected against direct sunlight.
General
Guarantee
In addition to the statutory warranty ob-
ligation, BEEM also grants an extended
manufacturer’s guarantee for some products.
Provided this is granted, the corresponding
details for each product can be found either
on the product-specific packaging, advertis -
ing material or on the BEEM website. Please
visit our website to obtain more information
on comprehensive guarantee conditions,
available accessories and spare parts as well
as user manuals in various languages.
Limitation of liability
We assume no liability for damage or follow-
up damage in the case of:
failure to observe the instructions in the
user manual, use for other than the intended
purpose,improper or unsuitable handling,
incorrectly performed repairs, unauthorised
modifications, use of non-approved parts or
spare parts, use of unsuitable supplementary
or accessory parts.
Declaration of Conformity
BEEM hereby declares that this appliance
complies with the fundamental requirements
and other relevant provisions of 2004/108/EC,
2006/95/EC, 2009/125/EC and 2011/65/EU
directives.
Troubleshooting
The following table will help you locate and eliminate minor faults:
Fault Possible cause Remedy
The appliance does not
work after turning the
rotary knob.
Plug not inserted into socket. Insert plug.
Automatic circuit breaker in elec-
trical distribution board tripped.
Switch on the automatic circuit
breaker again.
The internal safety switch has
switched off the appliance as a
result of overheating.
Allow the appliance to cool
down.
The jug and/or the lid is not fit -
ted properly.
Fit and lock the jug and lid
properly.
The automatic circuit
breaker in the electrical
distribution board trips.
Too many appliances connected
to the same power circuit.
Reduce the number of appli-
ances on the power circuit.
No fault detected. Contact customer service.
Motor runs extremely
slowly or stops.
Jug overfilled.
Remove some of the ingredi-
ents.
Pressure on the stopper is too
strong.
Exert less pressure.
NOTE
If you cannot resolve the problem with the steps described above, please contact cus-
tomer service.