25
EN
Power Station Pro4
BEEM - Elements of Lifestyle
Troubleshooting
The following table will help you locate and eliminate minor faults:
fault
Possible cause
Remedy
Power indicator (8)
does not light up or
the iron does not heat
up
Plug not inserted into
mains socket
Insert plug
No mains power
Check the mains socket or auto-
matic circuit breaker
Iron not switched on.
Set iron to desired temperature (4)
Defective lamp
Contact customer service
Stains in ironed wa-
shing
Water in tank is discolou-
red
Always empty the water tank
after use
Water tank light does
not light up
Temperature setting is too
low
Increase temperature, see
section "Selecting the ironing
temperature"
Calcium filter not installed
Install calcium filter
Water tank not locked in
Water tank not properly inserted
Water leaks out of the
ironing sole
Temperature setting is too
low
Increase temperature, see
section "Selecting the ironing
temperature"
Required temperature not
yet reached
Wait for a few seconds
Washing remains
creased
Temperature too low
Set temperature as high as pos-
sible. Pay attention to the label
in the garment!
Singed areas on the
ironed washing
Temperature too high
Set temperature lower and allow
iron to cool down Pay attention
to the label in the garment!
Power indicator
(8) flashes quickly,
temperature displays
switched off, buttons
do not function
Problem with appliance
circuitry, appliance is in
safety mode
Disconnect appliance from
mains, wait a few seconds and
reinsert the plug. If the problem
is not solved, notify customer
service
Содержание D3.001
