Beem Chromalon Keramik, Руководство пользователя

Страница: 15 / 40

11
EN Chromalon Keramik
BEEM - Elements of Lifestyle
Sealing ring
Remove all soiling thoroughly and dry ■
the sealing ring.
Insert the sealing ring into the lid again
■
as described in section Inserting the
sealing ring (page 10) .
NOTE
Do not put the lid or the sealing ring ►
into the dishwasher. They could be
damaged.
Safety valve
The safety valve can be removed for clean-
ing dirt.
Press down the red pin of the safety ■
valve until the silicon seal loosens on
the inside of the low-energy lid and the
pin falls out.
Clean the red pin and the silicon seal in
■
warm dishwater.
Dry both parts thoroughly before rein-
■
serting them.
First push the pin down through the
■
opening and then press the silicon seal
upwards over the pin until the recesses
of the silicon seal are seated firmly in
the opening.
Regulating valve
Before using each time, check that the
safety valve can move freely by turning the
low-energy lid. The valve must move freely
upwards. When the lid is turned back, the
valve easily falls back into the original posi-
tion. Remove the valve if it is dirty and no
longer moves freely.
Loosen the locking nut on the inside of ■
the lid by turning it anticlockwise. Hold
the steam valve on the outside of the lid
firmly at the same time.
Remove the red pin of the valve out of ■
its holder and clean all parts in warm
dishwater.
Dry all parts thoroughly before reas-
■
sembling.
Put the red valve pin into its holder and
■
both onto the low-energy lid from the
outside.
Screw the locking nut onto the valve
■
from the inside by turning it clockwise.
Hold the valve firmly from the outside at
the same time.
Before using, check for proper seating
■
and free movement.
NOTE
To ensure proper function of the low- ►
energy pot, the red valve pins may not
be mixed up. The thinner pin belongs
to the safety valve, the thicker to the
steam valve.
Storage
If you do not need to use the appliance for
a longer period of time, lay the lid upside
down on the low-energy pot to care for the
sealing ring.