EN
24
Drip Stop
The device has a drip stop which prevents water from dripping out of the
fi
lter compartment (
2
)
when the thermal jug (
6
) is removed from the device.
When the device is in operation, the
fi
lter compartment must be closed and the thermal jug with
a lid placed on it must be placed beneath the
fi
lter compartment. The lid of the thermal jug pushes
the drip stop upwards and the coffee can
fl
ow from the permanent
fi
lter (
8
) through the lid into
the thermal jug.
During the brewing process, the thermal jug must
not be removed for longer than 30
seconds
from the main unit as otherwise the permanent
fi
lter could over
fl
ow.
Preparation
PLEASE NOTE!
•
In the interest of your own safety, inspect the device and the connecting cable for damage
each time before you use it. Use the device only if it is in working order.
•
Do not operate the device without water or with less water than is required to reach the
4
Cups
mark. If this does happen, the device switches off automatically. In this case, allow the
device to cool down before water is poured in and the device is used again.
•
Never use the device without the thermal jug below the coffee outlet.
1. Prepare the coffee machine (see the “Handling and Operation” chapter).
2. Touch
the
fi
eld
ON/OFF
(
19
) to start the brewing process. The display (
3
) shows the red
operating lamp (
22
) and the indicator for the chosen coffee strength (
13
). Hot water is now
poured over the coffee powder to brew it.
After the end of the brewing process, the red operating lamp and the indicator of the coffee
strength go out. The thermal jug (
6
) can now be removed.
If the brewing process is to be stopped prematurely, touch the
fi
eld
ON/OFF twice.
After
the
fi
rst time, the red operating lamp goes out and the brewing process is aborted, the blue
timer control lamp (
16
) lights up and the preset time is activated. After the
fi
eld is touched
for the second time, the timer control lamp and the selected coffee strength goes out. The
device is now switched off.
Making Coffee with a Preset Time
To make coffee with a preset time, the clock needs to be set (see the “Handling and Opera-
tion” chapter – “Setting the Time”).
1. Prepare the coffee machine (see the “Handling and Operation” chapter).
2. Touch
the
fi
eld
PROG
(
18
) twice. The display shows
TIMER
(
12
) and the preset time
12:00
(
15
).
3. Set the hours by repeatedly pressing the
fi
eld
STD
(hours) (
21
)
. If the
fi
elds are pressed for
an extended period, the fast increment mode is activated.
02442_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 24
02442_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 24
06.12.2019 11:35:01
06.12.2019 11:35:01
