21
EN
Handling and Operation
Time
As soon as the mains plug is plugged into a plug socket, the control panel (
8
) and the display turns
on and the time
12:00
fl
ashes (
13
). The clock has a 24-hour time format (AM / PM).
1. Set the hours by touching the
fi
eld
TIMER
(
14
).
2. After a few seconds, the minutes display
fl
ashes. Set the minutes by touching the
fi
eld
TIMER
.
The time is saved until a new time is set or the device has been disconnected from the
power supply. To enter the time setting mode, touch the
fi
led
TIMER
for about 3 seconds.
Filling the Water Tank
1. Open the water tank lid (
1
).
2. Pour the quantity of water required for the number of cups you want (maximum 10 cups)
into the water tank (
10
).
Only ever use water to make coffee; do not pour milk or
other liquids into the water tank!
3. Close the water tank lid.
All of the water in the water tank is always used.
Pouring In Coffee Powder
1. Open
the
fi
lter compartment lid (
2
).
2. Insert
the
fi
lter insert (
5
) into the
fi
lter compartment (
3
).
3. Insert
a
fi
lter paper (size 1x4) into the
fi
lter insert.
4. Add the quantity of coffee powder you want to the
fi
lter directly. We recommend one level
coffee measuring spoon or one heaped teaspoon for each 125 ml cup.
5. Close
the
fi
lter compartment lid.
Drip Stop
The device has a drip stop (
6
) which prevents water from dripping out of the
fi
lter compart-
ment
(
3
) when the glass jug (
4
) is removed from the device.
When the device is in operation, the glass jug with the lid placed on it must be placed beneath the
fi
lter compartment. The lid of the glass jug pushes the drip stop on the
fi
lter insert (
5
) upwards
and the coffee can
fl
ow from the
fi
lter paper through the lid into the glass jug.
During the brewing process, the glass jug
must not be removed from the device for longer
than 30 seconds
as otherwise the permanent
fi
lter could over
fl
ow.
