4
3
4
Attach Backboard Braces
You will need:
Pre assembled parts from step 1 (parts 4 + 5) 2 x Bolts & Washers A (M8 x 16mm)
1 x Backboard
Bend both struts of the Backboard Bracket (part 5) outwards and attach them to the backboard using two Bolts,
Nuts and Washers A.
Attach Ring to Backboard
You will need:
Pre assembled parts from steps 2-3 (backboard with braces and bracket)
Hoop/Ring (part 2)
2 x Bolts, Nuts & Washers B (M8 x 40mm) 2 x Bolts, Springs, Nuts & Washers D (M8 x 110mm)
They should sit in this order once assembled:
Bolt > Washer > Ring > Backboard > Washer > Nut
Attach ring (part 2) to the backboard (part 1) using two Bolts, Nuts and Washers B and two Bolts, Springs, Nuts
& Washers D. The spring bolts go in the top two holes, and the plain bolts in the bottom two holes. The bolts go
through the ring then through the backboard and are fixed in place using the nuts.
