Becx Machines HS75HR Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 35

Becx Machines HS75HR Скачать руководство пользователя страница 9

Hedge trimmer

Type: HS75HR

Version: 01

July 2019

Page 9 of 35

other purposes.



During inspection, maintenance, or cleaning, the hydraulic feed to the hedge
trimmer must be disconnected to prevent it being accidentally switched on.



The local work and safety regulations must be observed.



If the installation is to be used in the dark, sufficient lighting must be used
(approx. 50 lux on the place of operation).



Trimming work must be stopped immediately when people or animals
approach or enter the safety zone. (see 4.2)



To prevent damage to the installation, the device must be gradually switched
off using the lowest RPMs. Depending on the tool holder used, this is idling
speed or the minimal flow.

2.3

Operating personnel:



Operating personnel must be older than 18 years of age.



Only individuals authorized by the owner may work on or with the installation.



Operators may only perform work activities that they are trained for. This
applies to both the maintenance work and normal usage.



The operating personnel must be acquainted with all situations that can
occur.



If the operating personnel discover faults or risks or do not agree with the
safety measures, this must be reported to the owner or person in charge.

«
...
7
8
9
10
11
...
»

Содержание HS75HR




































Отзывы:

Нет отзывов