Becx Machines HS75HR, Руководство пользователя, Страница: 20 / 35

Hedge trimmer
Type: HS75HR
Version: 01
July 2019
Page 20 of 35
No. What to do Action Result
1 Check the
installation

check the following points:

check the blades:

The blades must not be worn away too much and
must be in balance (see 0).

Check the blades for damage and cracks before
starting work, after four hours of trimming, or
immediately after the blades come into contact with
materials other than that intended.

At a minimum, each day, visually check that the locking
plate and locking nuts of the blade head are present.

Check that the rotation direction of the blades matches
the arrow on the housing.

Check the rotational speed of the blades.

Check that the blades work without vibrating.

If one of the above checks discovers a deficiency, it must
first be rectified before the hedge trimmer can be used.
Continuing to
work with loose
locking nuts,
cracked blades, or
with an
installation that
runs poorly or too
quickly may cause
damage to the
installation
and/or injure the
operator or
bystanders.
2 Check the work
area.

Check the hedge to be trimmed and the surrounding area
on the following points:

Are obstacles present that could be damaged by the
hedge trimmer or that could cause damage to the hedge
trimmer?

Are there any loose elements, such as litter, loose iron
wire, and so on?

Ensure that there are no people or animals within the
safety zone.

If lots of passers by would cause the work to be stopped
often, the work area must be fenced off.

The work area must be fenced off when the hedge is tall
and so dense that it blocks the overview of the other
side.

At all times, measures must be in place to prevent
anyone being present on the other side of a non-
transparent hedge.
Take this into
account when
trimming.
Remove loose
items to prevent
damage to the
hedge trimmer.
3 Drive to the
work area

Always switch off the hedge trimmer when it is not being
used to trim.

The chance that a bystander enters the danger zone
unnoticed is greater during the trimming.

If there is no hedge, parts can fly away unhindered over a
large distance.