background image

Hood / User Manual

16 /  EN

Prior to cleaning and maintenance, unplug the ap-

pliance or turn the main switch off or loosen the 

fuse that supplies the hood.

5.1 Aluminum filter

This filter captures oil particles in the air. You are 

recommended to clean your filter every month 

under normal usage conditions. First remove the 

aluminum filters for this process. Wash the filters 

with liquid detergent and rinse them with water 

and install them back after they get dry. Aluminum 

filters may get discolored as they are washed; this 

is normal and you don't need to change your filter.

5.1.1 Removing the aluminum 

filters

1. Push the aluminum filter lock forward.

2. Then, slightly lower it and pull forward. 

Otherwise, you may bend the filter. (Figure 9) 

After the aluminum filter is washed and dried, 

reinstall the filter to its slot by applying above 

steps in reverse order.

Carbon filter (Using without flue)

This filter removes the cooking odours. If it is not 

possible to use a flue, it purifies the air which is 

circulated inside the kitchen. Carbon filter of your 

appliance will get clogged in time depending on 

the frequency of use, style of cooking and regular 

cleaning of the aluminum filters.

A

Caution! 

Carbon filter should never be 

washed.

You may obtain carbon filters from Beko 

Authorised Service Agents.

5.2.1 Replacing the carbon filter

 

Remove the aluminum filters. (Figure 9)

 

To remove carbon filter, turn the tabs counter-

clockwise and release the filter. (Figure 10

 

Install the new carbon filter.

 

Install the aluminum filters.

(Figure 10)

Anti-odor filters contain charcoal (active carbon). 
They must be changed with periods of approxi-

mately 3 months.
Regardless of using a carbon filter or not, alumi-

num filters must always be installed. 
Do not operate your appliance without the alu-

minum filter in place. Using with carbon filter will 

decrease suction performance of the appliance.

C

You can also wash aluminum filters 

in dishwasher.

Cleaning and maintenance

(Figure 9)

Содержание HCA63640B



















Отзывы: