Beco HCA63640B Скачать руководство пользователя

Страница: 2 / 18

Complies with the WEEE Directive.

This product was manufactured using the latest technology in environmentally friendly conditions.

Please read this user manual first!

Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from

your product which has been manufactured with high quality and state-of-the-art

technology. Therefore, please read this entire user manual and all other accompanying

documents carefully before using the product and keep it as a reference for future use.

If you handover the product to someone else, give the user manual as well. Follow all

warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences

between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

Important information or useful hints

about usage.

Warning for hazardous situations

with regard to life and property.

Warning for electric shock.

Does not contain PCB.

Содержание HCA63640B



















Результаты поиска

Содержание HCA63640B

Отзывы:

Похожие инструкции для HCA63640B

Бренды по названию

Популярные бренды

Beco HCA63640B, Руководство пользователя

Результаты поиска

Содержание HCA63640B

Отзывы:

Похожие инструкции для HCA63640B

Бренды по названию

Популярные бренды