Beckman Coulter Microfuge 16, Инструкция по эксплуатации

Страница: 21 / 54

PN A49436AG
2-7
Description
Display
2
Time
Timed and continuous runs can be selected by pressing the
MENU
key until
m
and
s
flash in the
display, and then pressing the up and down arrow keys to adjust the setting.
•
A timed run can be set from 10 seconds up to 99 minutes 59 seconds in 1-second increments.
The up and down arrows are used to adjust the setting. A timed run can be stopped at any time
by pressing the
START STOP
key.
• In continuous run mode, the run time is not limited and the run must be ended manually.
• Continuous run mode is indicated by
--:--
in the Time display, which is accessed either by
selecting a time setting of 10 seconds (0:10) and pressing the down arrow once, or by selecting
99:59 and pressing the up arrow once. When the
START STOP
key is pressed, the rotor
accelerates to the set speed and run time counts up. After 99 minutes 59 seconds, run time is
no longer displayed but the run continues.
A short run is started by pressing and holding the
START STOP
key. The rotor accelerates to
maximum speed,
short run
is displayed, and the run time begins counting up in seconds.
•
A short (pulse) run has no set time. The rotor accelerates to maximum speed, even if a lower
speed setting is selected.
•
A short run ends when the
START STOP
key is released. During deceleration, the elapsed time is
displayed until the rotor reaches 0 rpm. The door opens automatically.