Beckman Coulter CSD2, Инструкция по эксплуатации

Страница: 18 / 24

Cleaning
The instruction overlay on the digital reader has a protective coating. To clean the
instrument, dampen an absorbent tissue with warm water and a mild detergent and wipe
all surfaces.
Troubleshooting and Maintenance
The error indicator "flashing zero" indicates an error in the reading sequence. Repeat the
reading. Select
Set to reset and begin the reading process.
The light is the only user-serviceable part of the digital reader. To replace the light, remove
the bottom plate by releasing the four screws on the underside. For more information, refer
to
Readout Setting figure. Gently dislodge the bulb by pulling out the bulb. Remove bulb
and snap in new bulb. Replace the component to the original position.
The StatSpin CritSpin Digital Reader has no other user-serviceable parts. If a problem
occurs, the operator must contact Beckman Coulter Customer support 1-800-854-3633.
Disassembly of the unit voids the warranty.
Operating Instructions
Cleaning
2-4
55-003823-001CC