Beckman Coulter CSD2, Инструкция по эксплуатации

Страница: 16 / 24

1. Press button 2. Set button
Figure 2.2 LEDs that Flash
1. LED that flashes for step 3 . 2. LED that flashes for step 4 .
4
Move the pointer to the bottom of the red blood cells (top of the clay). Then press Set .
The system displays
0
in the digital display.
The LED next to the label Move pointer to top of plasma. Set "100" flashes.
5
Move the pointer to the top of the plasma (plasma and air interface). Then press Set .
The system displays 100 in the digital display.
The digital display becomes active, and numbers change as you move the pointer.
6
Move the pointer slowly to the plasma and red cell interface, and then press Press .
Note
To avoid false readings, do not press the membrane on either side of the gliding
pointer arm.
7
Read the digital display, and record the number.
8
Turn the rotor for the next tube to be read, and press Set to initiate the next reading.
9
Continue until all tubes are read and recorded.
Operating Instructions
Read Spun Hematocrit Tubes inside Rotor
2-2
55-003823-001CC