manualshive.com logo in svg

Beckhoff EP9214-0023, Документация, Страница: 21 / 113

Поделиться
Скачать
Beckhoff EP9214-0023 Скачать руководство пользователя страница 21

Mounting and cabling

EP9214-0023 and EP9224-0023

21

Version: 2.3.1

Pin assignment

Fig. 16: Pin assignment of 7/8" plug connectors

Contact

Voltage

1

GND Up

2

GND Us

3

FE (Functional earth), (as well as contact at central mounting holes)

4

Control voltage Us, +24 V

DC

5

Peripheral voltage Up, +24 V

DC

Attention

Do not confuse the power output with the EtherCAT connection!

Never connect the power cables (M8, 24 VDC) to the green-marked EtherCAT sockets of
the EtherCAT Box Modules. This can cause the destruction of the modules!

Control voltage Us: 24V

DC

The fieldbus and the processor logic are supplied from the 24 V

DC

 control voltage Us. The control voltage is

electrically isolated from the fieldbus circuitry.

Peripheral voltage Up: 24V

DC

The peripheral voltage Up is monitored and fed to the power outputs, but is not used in the EP9214.

Redirection of the supply voltages

The power connections Power In and Power Out are bridged in the module. Hence, the supply voltages Us
and Up can be passed from EtherCAT Box to EtherCAT Box in a simple manner.

Attention

Observe the maximum current of the 7/8" plug connectors!

Also ensure when relaying the supply voltages Us and Up onward that the maximum per-
missible current of 16 A / 40 °C for each 7/8" plug connector is not exceeded!

Содержание EP9214-0023


















































































































Отзывы:

Нет отзывов