Beckhoff EM7004, Документация

Страница: 65 / 130

Commissioning
EM7004 65 Version: 2.0
• the devices/modules be connected to the power supply and ready for communication
• TwinCAT must be in CONFIG mode on the target system.
The online scan process consists of:
• detecting the EtherCAT device [
}
70] (Ethernet port at the IPC)
• detecting the connected EtherCAT devices [
}
71] . This step can be carried out independent of the
preceding step
• troubleshooting [
}
74]
The scan with existing configuration [ } 75] can also be carried out for comparison.
4.2.5 OFFLINE configuration creation
Creating the EtherCAT device
Create an EtherCAT device in an empty System Manager window.
Fig. 77: Append EtherCAT device (left: TwinCAT 2; right: TwinCAT 3)
Select type ‘EtherCAT’ for an EtherCAT I/O application with EtherCAT slaves. For the present publisher/
subscriber service in combination with an EL6601/EL6614 terminal select “EtherCAT Automation Protocol
via EL6601”.
Fig. 78: Selecting the EtherCAT connection (TwinCAT 2.11, TwinCAT 3)
Then assign a real Ethernet port to this virtual device in the runtime system.
Fig. 79: Selecting the Ethernet port