Mounting and wiring
EK3100
12
Version: 1.5
3
Mounting and wiring
3.1
Instructions for ESD protection
NOTE
Destruction of the devices by electrostatic discharge possible!
The devices contain components at risk from electrostatic discharge caused by improper handling.
• Please ensure you are electrostatically discharged and avoid touching the contacts of the device directly.
• Avoid contact with highly insulating materials (synthetic fibers, plastic film etc.).
• Surroundings (working place, packaging and personnel) should by grounded probably, when handling
with the devices.
• Each assembly must be terminated at the right hand end with an
bus end cap, to en-
sure the protection class and ESD protection.
Fig. 3: Spring contacts of the Beckhoff I/O components
3.2
Mounting
3.2.1
Dimensions
The following illustrations show the dimensions of the Bus Couplers.
Drawings in DWF and STEP format can be found in the
