Commissioning
EJ5002
38
Version: 1.4
6
Commissioning
6.1
Reference to documentation EL500x
Detailed documentation on the commissioning of the EJ500x modules is being prepared.
NOTE
Damage to devices or loss of data
The descriptions and notes on the commissioning of the EL500x EtherCAT Terminals are
transferable to the EJ500x EtherCAT plug-in modules.
Before commissioning, read the detailed description of the process data, operation modes
and parameterization in the
6.2
EJ5002 - Object description and parameterization
EtherCAT XML Device Description
The display matches that of the CoE objects from the EtherCAT
ommend downloading the latest XML file from the download area of the Beckhoff website and in-
stalling it according to installation instructions.
Parameterization via the CoE list (CAN over EtherCAT)
The EtherCAT device is parameterized via the CoE - Online tab (with a double click on the respec-
tive object) or via the Process Data tab (assignment of PDOs). A detailed description can be found
in the EtherCAT System-Documentation in chapter “
EtherCAT subscriber configuration
Please note the general CoE notes in the EtherCAT System Documentation in chapter “
” when using/manipulating the CoE parameters:
- Keep a startup list if components have to be replaced
- Differentiation between online/offline dictionary, existence of current XML description
- use "CoE reload" for resetting changes
Introduction
The CoE overview contains objects for different intended applications:
• Objects required for parameterization during commissioning:
◦
◦
• Profile-specific objects:
◦
◦
data Index 0xF000, 0xF008, 0xF010
•
The following section first describes the objects required for normal operation, followed by a complete
overview of missing objects.
Содержание EJ5002
Страница 1: ...Documentation EN EJ5002 SSI Encoder Interface 2021 10 04 Version 1 4...
Страница 2: ......
Страница 4: ...Table of contents EJ5002 4 Version 1 4 7 Appendix 46 7 1 Support and Service 46...
Страница 47: ......