Beckhoff CX8093, Документация

Страница: 45 / 73

Parameterizing and commissioning
CX8093 45 Version: 1.6
Linking data without using the PLC
You can use the CX8093 without PLC functionality to link data from PROFINET to K-Bus or E-Bus. In this
case you use the CX8093 as a configured bus coupler. Pay attention that always one task triggers the
PROFINET and the K-Bus or E-Bus cycle at minimum. Without task the according interfaces are not
executed.
If you want to link bits to a word, for example, activate the options Exclude other Devices and Continuous
(Mapping) .