Beckhoff CX51x0 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 95

background image

Commissioning

CX51x0

33

Version: 2.8

6

Commissioning

6.1

Assembly

6.1.1

Note the permissible installation positions

Increased heat generation

The Embedded PC may overheat if the installation position is incorrect or the minimum distances
are not adhered to.

The Embedded PC may only be operated at ambient temperatures of up to 60 °C. Ensure adequate
ventilation. Select a horizontal installation position. Leave at least 30 mm clearance above and be-
low the Embedded PC.

Install the Embedded PC horizontally in the control cabinet on a mounting rail, in order to ensure optimum
heat dissipation.

Note the following specifications for the control cabinet:

• The Embedded PC should only be operated at ambient temperatures between -25 °C and 60 °C.

Measure the temperature below the Embedded PC at a distance of 30 mm to the cooling fins, in order
to determine the ambient temperature correctly.

• Adhere to the minimum distances of 30 mm above and below the Embedded PCs.

• Additional electrical equipment affects the heat generation in the control cabinet. Select a suitable

control cabinet enclosure depending on the application, or ensure that excess heat is dissipated from
the control cabinet.

Correct installation position

The Embedded PC must be installed horizontally on the mounting rail. Ventilation openings are located at
the top and bottom of the housing. This ensures an optimum airflow through the Embedded PC in vertical
direction. In addition, a minimum clearance of 30 mm above and below the Embedded PCs required, in order
to ensure adequate ventilation.

Fig. 18: CX51x0 Embedded PC, permitted installation position.

If vibrations and impact occurs in the same direction as the mounting rail, the Embedded PC must be
secured with an additional bracket, in order to prevent it slipping.

«
...
31
32
33
34
35
...
»

Содержание CX51x0
































































































Отзывы:

Нет отзывов

Похожие инструкции для CX51x0

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 8

Бренд: Tandy Страницы: 82

Бренд: Zotac Страницы: 17

Бренд: Gateway Страницы: 126

PC 300GL Type 6561

Бренд: IBM Страницы: 66

Бренд: Aaeon Страницы: 64

Бренд: Zotac Страницы: 57

Бренд: Acer Страницы: 48

Бренд: Acer Страницы: 68

5535-5050 - Aspire

Бренд: Acer Страницы: 11

Бренд: Acer Страницы: 24

Бренд: Acer Страницы: 24

Бренд: Acer Страницы: 22

Бренд: Acer Страницы: 117

Бренд: Acer Страницы: 108

AcerPower S series

Бренд: Acer Страницы: 53

Бренд: Acer Страницы: 113

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды