Beckhoff CPX3915-0010, Инструкция по установке и эксплуатации

Страница: 27 / 38

Operation
CPX39xx-0010 27 Version: 0.1
6 Operation
6.1 Switching the Control Panel on and off
Switching on
The Control Panel does not have its own mains power switch. As soon as the power supply is switched on
the Control Panel is activated.
Shutting down and switching off
Control software such as is typically used on Industrial PCs permits various users to be given different rights.
A user who may not close software may also not switch the Industrial PC off, since data can be lost from the
storage medium by switching off while software is running.
WARNING
First shut down, then switch off!
If the Industrial PC is switched off as the software is writing a file to the storage medium,
the file will be destroyed. Control software typically writes something to the storage medium
every few seconds, so that the probability of causing damage by switching off while the
software is running is very high.
WARNING
Switch off power supply
When you have shut down the Industrial PC, you have to switch off power supply for at
least 10 seconds before rebooting the system.
After resetting power supply the Industrial PC will start booting automatically.
6.2 Touch screen
The operation of the Control Panel occurs via the Touch Screen.
WARNING
Risk of damaging the Touch Screen
The touch screen may only be actuated by finger tips or with the touch screen pen. The op-
erator may wear gloves but there must be no hard particles such as metal shavings, glass
splinters embedded in the glove.
WARNING
Properly installation of the system and the multi-touch device
Capacitive Touch Screens use the functional principle of capacitive alternation of the elec-
trical field. Strong electrical fields can influence the functionality of the multi-touch devices.
To ensure the correct function of the Touch Screen take care of a standardized installation
of all parts of the system and an EMC-environment conforming to standards.