Beckhoff CP71 Series, Инструкция по установке и эксплуатации

Страница: 12 / 23

Installation Instructions
Installation of the PC
The Panel PC series CP71xx is designed for mounting arm installation. A
Control Panel is installed in the front of the Panel PC.
The ambient conditions specified for operation must be observed (see the
section
Technical data ).
i
Note
When the unit is installed in an enclosure, adequate space for
ventilation and for opening the PC must be provided.
Please note the following points during installation of the PC:
•
Position the PC in such a way that reflections on the screen are
avoided as far as possible.
•
Use the position of the screen as a guide for the correct installation
height; it should be optimally visible for the user at all times.
•
The PC should not be exposed to direct sunlight.
Warning
Extreme environmental conditions should be avoided as far as
possible. Protect the rear of your PC from dust, humidity and heat.
The clearance above and below the housing must be at least 50 cm in
order to ensure adequate ventilation of the PC.
The cooling ribs of the PC must not be covered.
Earthing measures
Earthing measures
Earthing connections dissipate interference from external power supply
cables, signal cables or cables to peripheral equipment.
The earthing of the PC is established via the power supply cable.
10 CP71xx