Beckhoff CP32 -2 -0020 Series, Руководство пользователя

Страница: 17 / 45

Commissioning
CP32xx-2xxx-0020 17 Version: 1.1
The Panel PC is supplied automatically with the standard mounting arm adapter (1) already mounted. In
addition, you have the option to order a rotary adapter (2) under the order identifier C9900-M809. Figure 8
shows the two available mounting arm adapters.
1 2
Fig. 8: CP32xx_mounting arm adapters
The rotary adapter is mounted on the standard mounting arm adapter. To do this, follow the steps below as
shown in Figure 9:
1. Remove the two screws from the standard mounting arm adapter (Section A).
2. Place the rotary adapter between the holding brackets of the standard adapter (Section B).
3. Insert the two screws of the standard adapter again (section C).
ð You have now mounted the rotary adapter on the standard adapter.
A B
C
Fig. 9: CP32xx_mounting the rotary adapter
The PC is mounted rigidly on the mounting arm with the standard mounting arm adapter. With the additional
lever, the rotary adapter offers the possibility to rotate the device after mounting on the mounting arm.
Push-button extension
You have the option to order the additional C9900-M800 key extension from your Beckhoff distributor.
For explanations of the key extension, functions and assembly, refer to the associated C9900-M800 manual.