Power Management Setup
Chapter:
BIOS Settings
Beckhoff New Automation Technology
CB2050
page 55
4.7 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
[Enabled]
Item Help
ACPI Suspend Type
[S1(POS)]
Run VGABIOS if S3 Resume
Yes
Power Management
[User Define]
Video Off Method
[DPMS]
Video Off in Suspend
[Yes]
Suspend Type
[Stop Grant]
Modem Use IRQ
[3]
Suspend Mode
[Disabled]
HDD Power Down
[Disabled]
Soft-Off by PWR-BTTN
[Instant-Off]
PWRON After PWR-Fail
[On]
Wake-Up by PCI card
[Disabled]
Power On by Ring
[Disabled]
x USB KB Wake-Up From S3
Disabled
Resume by Alarm
[Disabled]
x Date(of Month) Alarm
0
x Time(hh:mm:ss)
0 : 0 : 0
↑↓→←:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI function
Options:
Enabled / Disabled
ACPI Suspend Type
Options:
S1(POS) / S3(STR) / S1&S3
Run VGABIOS if S3 Resume
Options:
Auto / Yes / No
Power Management
Options:
User Define / Min Saving / Max Saving
Video Off Method
Options:
Blank Screen / V/H SYNC+Blank / DPMS
Video Off In Suspend
Options:
No / Yes
Suspend Type
Options:
Stop Grant / PwrOn Suspend
MODEM Use IRQ
Options:
NA / 3 / 4 / 5 / 7 / 9 / 10 / 11
Suspend Mode
Options:
Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12 Min / 20 Min / 30 Min / 40 Min / 1 Hour
HDD Power Down
Options:
Disabled / 1 Min ... 15 Min
Soft-Off by PWR-BTTN
Options:
Instant-Off / Delay 4 Sec
PWRON After PWR-Fail
Options:
Former Sts / On / Off
