Beckhoff C6032, Руководство пользователя

Страница: 11 / 53

Product overview
C6032 11 Version: 2.0
3.2.2 Ethernet RJ45
In the C6032, four Gigabit LAN connections (X102-X105) are realized with two standard connectors, each
with two connections. The Ethernet standards 100Base-T and 1000Base-T enable connection of
corresponding network components with data rates of 100/1000 Mbit/s. The required speed is selected
automatically.
The RJ45 connection technology with twisted-pair cables is used. The maximum length of the cable
connection is 100 m.
The Ethernet port LAN1 integrated in the chipset is suitable for real-time Ethernet applications with cycle
times > 1 ms without distributed clock applications with EtherCAT. The cycle times for the ports LAN2-LAN4
are < 1 ms.
The controllers are used as follows, based on the device generations:
Table 3: Controller classification based on device generations
Generation Controller
C6032-0060 Intel
®
i219 (PHY) for LAN1 and Intel
®
i210 (MAC/
PHY) for LAN2-LAN4
C6032-0070 Intel
®
i219 (PHY) for LAN1 and Intel
®
i210 (MAC/
PHY) for LAN2-LAN4
1
8 1
8
1
8
8
1
X102 X103
X104 X105
LAN 1 LAN 2
LAN 3 LAN 4
Fig. 3: C6032_Ethernet interface pin numbering
Table 4: Ethernet interface pin assignment
Pin Signal Description
1 T2 + Pair 2
2 T2 -
3 T3 + Pair 3
4 T1 + Pair 1
5 T1 -
6 T3 - Pair 3
7 T4 + Pair 4
8 T4 -
The LEDs of the LAN interfaces indicate the activity and the speed of the data transfer (Mbit/s). The LED on
the left indicates whether the interface is connected to a network. If this is the case, the LED lights up green.
The LED flashes when data transfer is in progress.
The LED on the right indicates the speed of the data transfer. If the speed is 100 Mbit/s the LED is orange, at
1000 Mbit/s it is green.