Beckhoff C6032, Руководство пользователя

Страница: 14 / 53

Product overview
C6032 14 Version: 2.0
3.3 Optional interfaces
You can extend the Industrial PC beyond the basic configuration by additional interfaces. The following PCIe
Compact modules are available to you for this:
• USB 3.0 (order identifier: C9900-E305)
• Ethernet RJ45 (order identifier: FC9082)
• RS232 (order identifier: C9900-E306)
• RS422 (order identifier: C9900-E313)
• RS485 (order identifier: C9900-E312)
• CP-Link 4 (order identifier: C9900-E307)
Further modules are available on request. Any modules that are ordered are installed ex factory.
If you bought the device with the basic configuration, you can extend it later by the modules mentioned
above. To do this, replace the blank covers with the modules by undoing the two Torx TX8 screws of the
covers and tightening them again after inserting the modules.
3.3.1 USB 3.0 PCIe compact module
The USB 3.0 PCIe compact module includes two USB ports with a data transfer rate of up to 5 Gbit/s
according to the USB 3.0 specification. Each port supplies up to 1 A power and is electronically protected.
They are used to connect peripheral devices with USB interfaces. Compatibility with all USB standards is
assured.
The module requires Windows Embedded Standard 7, Windows 7 or Windows 10.
4 4
3 3
2 2
1 1
Fig. 6: C6032_USB interface pin numbering
Table 7: USB interface pin assignment
Pin Connection Typical assignment
Shell Shield Drain Wire
1 VBUS Red
2 D - White
3 D + Green
4 GND Black
5 StdA_SSRX - Blue
6 Std Yellow
7 GND_DRAIN N/A
8 StdA_SSTX - Purple
9 Std Orange