Beckhoff C5101, Инструкция по установке и эксплуатации

Страница: 17 / 20

Troubleshooting
Shutting down
Disposal
Dismantling the Industrial
PC
Observe national
electronics scrap
regulations The device must be fully dismantled in order to dispose of it. The housing
can be sent for metal recycling.
Electronic parts such as disk drives and circuit boards must be disposed of
in accordance with national electronics scrap regulations.
Troubleshooting
Please also refer to chapter General Notes .
Fault correction
Fault Cause Procedure
Nothing happens after the Industrial
PC has been switched on No power supply to the Industrial
PC.
Other cause. Check power supply cable.
Call Beckhoff Service..
The Industrial PC does not boot
fully CD in drive.
Setup settings are incorrect.
Other cause. Remove CD and press any
key.
Check the setup settings.
Call Beckhoff Service.
Computer boots, software starts,
but control does not operate
correctly Cause of the fault is either in the
software or in parts of the plant
outside the Industrial PC. Call the manufacturer of the
machine or the software.
Error during CD access Faulty CD.
Faulty disk drive. Check the disk in another
disk drive.
Call Beckhoff Service.
The Industrial PC functions only
partially or only part of the time, e.g.
no or dark picture, but disk drive
responds when switching on Defective components in the
Industrial PC. Call Beckhoff Service.
C5101 15