Beckhoff BC**50 Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 90

background image

Parameterization and Commissioning

BC5250

37

Version: 2.0.0

Note

Strings can only be entered at the second call

No strings can be entered under address when the dialog is first called (see above). Enter
the name, AMS Net ID and transport type and close the dialog. With the second call you
can enter your COM port.

The communication starts when TwinCAT is in Config mode (TwinCAT icon is blue) or RUN mode (TwinCAT
icon is green). The COM interface remains open until a TwinCAT stop occurs (TwinCAT icon is red). It is
then available again for other programs. No error message is issued if the COM interface is used by another
program during a TwinCAT restart (e.g. by the KS2000 configuration software).

Note

AMS Net ID after ADS connection via the fieldbus

If you have addressed the Bus Terminal Controller with an ADS connection via the fieldbus
before the serial ADS was used, the AMS Net ID was automatically changed by the System
Manager. In this case a new serial ADS connection is only possible, if the AMS Net ID is
adjusted.

BX series: reading the AMS Net ID

The current AMS Net ID can be read from the menu via the display of BX series Bus Terminal Controller.

AMS

1.1.1.1.1.1

AMS Net ID

4.2.7

DeviceNet slave interface

4.2.7.1

DeviceNet slave interface EDS file

BX5200

EDS file BX5200.eds (for controllers other than TwinCAT) (https://infosys.beckhoff.com/content/1033/

bc5250/Resources/eds/3602698891.eds)

EDS file BX5200S.eds (https://infosys.beckhoff.com/content/1033/bc5250/Resources/

eds/3602698891.eds)

For TwinCAT both EDS files must be copied into the directory

TwinCAT\IO\DeviceNet

.

Image for BX5200.ico (https://infosys.beckhoff.com/content/1033/bc5250/Resources/

zip/3602701067.zip)

BC5250

EDS file BC5200.eds (for controllers other than TwinCAT) (https://infosys.beckhoff.com/content/1033/

bc5250/Resources/eds/3602703243.eds)

EDS file BC5200S.eds (https://infosys.beckhoff.com/content/1033/bc5250/Resources/

eds/3602705419.eds)

For TwinCAT both EDS files must be copied into the directory

TwinCAT\IO\DeviceNet

.

Image for BC5250.ico (https://infosys.beckhoff.com/content/1033/bc5250/Resources/

zip/3602707595.zip)

«
...
35
36
37
38
39
...
»

Содержание BC**50 Series



























































































Отзывы:

Нет отзывов

Похожие инструкции для BC**50 Series

Бренд: Faber Страницы: 8

Бренд: dbx Страницы: 52

Бренд: Hankscraft Runxin Страницы: 58

Бренд: Samson Страницы: 20

Compact Comfort VAV12

Бренд: SAI HVAC Страницы: 16

Бренд: Saitek Страницы: 15

Бренд: saia-burgess Страницы: 203

Бренд: Sailor Страницы: 1

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 26

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 2

Бренд: YASKAWA SIEMENS Страницы: 373

U1000 iQpump Drive

Бренд: YASKAWA Страницы: 426

Бренд: YASKAWA Страницы: 26

Бренд: YASKAWA Страницы: 210

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 400

Z1000 CIMR-ZU*A Series

Бренд: YASKAWA Страницы: 466

Smart Control Panel 880RGD

Бренд: Raynor Страницы: 4

Бренд: Sabiana Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды