Beckhoff BC**50 Series Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 90

background image

Parameterization and Commissioning

BC5250

36

Version: 2.0.0

4.2.6

ADS connection via serial interface

(from firmware version 1.xx or 0.99x, Bus Terminal Controllers of the BX series and for all BCxx50)

From TwinCAT 2.9 build 1020 (TwnCAT level PLC, NC or NCI)

Note

Use only a serial connection

To ensure trouble-free operation of the ADS link via the serial interface, only a serial con-
nection to the BX controller is allowed.
After successful configuration via the System Manager, close the System Manager before
starting programming.

Note

AMS Net ID in delivery state (default)

For BX9000

The default AMS Net ID is 172.16.21.20.1.1. If the IP address of the BX9000 is changed,
the AMS Net ID of the BX9000 also changes. There is a menu option for displaying the cur-
rent AMS Net ID.
Example: If you change the IP address to 10.2.3.7, the AMS Net ID changes to
10.2.3.7.1.1.

For BC9050, BC9020, BC9120

The default AMS Net ID is 172.16.xxx.[DIP switch].1.1. If the IP address of the BX9xxx is
changed, the AMS Net ID of the BX9xxx also changes.
Example: If you change the IP address to 10.2.3.7, the AMS Net ID changes to
10.2.3.7.1.1.
BC9050: DEFAULT 172.16.21.[DIP-Switch].1.1
BC9020: DEFAULT 172.16.22.[DIP-Switch].1.1
BC9120: DEFAULT 172.16.23.[DIP-Switch].1.1

Initializing the ADS connection

Enter the Bus Terminal Controller in the remote connection under TwinCAT. Click on the TwinCAT icon and
open the features menu. The following settings can be made under the >AMS Remote< tab.

Fig. 32: Properties of the remote connection

Remote Name: Any
AMS-Net-ID: 1.1.1.1.1.1 (Default)
Address: COM Port: Baud rate, parity, data bits, stop bits
Transport: Select "COM port"

When the Bus Terminal Controller is switched on, the default AMS Net ID is always "1.1.1.1.1.1" (except all
Ethernet Controllers).
The AMS Net ID can be changed as required. Please note that the new AMS Net ID cannot be changed
again in this way.

If you need to change the new AMS Net ID again, you have to restart the Bus Terminal Controller, so that
the AMS Net ID is reset to the default AMS Net ID, "1.1.1.1.1.1".
You can now change the AMS Net ID again.

«
...
34
35
36
37
38
...
»

Содержание BC**50 Series



























































































Отзывы:

Нет отзывов

Похожие инструкции для BC**50 Series

Бренд: GARDTEC Страницы: 48

Бренд: FAAC Страницы: 64

Бренд: Echelon Страницы: 40

Бренд: Jafar Страницы: 9

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 32

Бренд: Access Страницы: 12

Бренд: babyzen Страницы: 11

Бренд: Zamel Страницы: 23

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 2

Бренд: Zander Aachen Страницы: 44

Extra Free ROB-01/12-24V

Бренд: Zamel Страницы: 2

Бренд: Zamel Страницы: 14

Бренд: oventrop Страницы: 64

Бренд: Airmar Technology Corporation Страницы: 4

Бренд: Motorline professional Страницы: 8

Бренд: Swagelok Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды