Beckhoff AG3300, Руководство по эксплуатации

Страница: 41 / 68

Technical data
Version: 2.5 ─── 41 AG3300
4.8
NPS035 MA
Mechanical data 1-stage 2-stage
Ratio 3 4 9 12 15 16 20 28 30 40
Efficiency under full load ŋ [%] 97 95
Running noise L
PA
[dB]
at n1 = 3000 rpm without load
≤ 65 ≤ 61
Service life L
h
[h] > 20000
Weight [kg]
Depending on the clamping hub diameter
and selected adapter plate
8.4 8.8
Mass moment of inertia J
1
[kgcm²]
Based on the drive
Letters = specification of the clamping hub diameter
C = 14 mm --- --- 0.6 0.59 0.6 0.43 0.42 0.37 0.52 0.36
D = 16 mm --- --- 0.75 0.74 0.74 0.58 0.57 0.5 0.67 0.51
E = 19 mm 2.5 1.7 0.84 0.83 0.83 0.66 0.65 0.6 0.75 0.6
G = 24 mm 3.3 2.4 1.9 1.9 1.9 1.7 1.7 1.6 1.8 1.6
H = 28 mm 3 2.2 1.6 1.6 1.6 1.4 1.4 1.3 1.5 1.3
I = 32 mm 7.1 6.2 --- --- --- --- --- --- --- ---
K = 38 mm 8.3 7.4 --- --- --- --- --- --- --- ---
Torques and speeds
Maximum torque T
2a
[Nm] 480 480 480 480 480 480 480 480 432 480
Maximum acceleration torque T
2B
[Nm]
Maximum 1000 cycles per hour
305 305 305 305 305 305 305 305 270 305
EMERGENCY STOP torque T
2Em.stop
[Nm]
Possible 1000 times during the service life
of the gear unit
500
Nominal input speed n
1N
[min
-1
] 2000 2200 2700 3300 3400 3300 3400 3600 3900 3900
Maximum input speed n
1Max
[min
-1
] 6000 6000 7000 7000 7000 7000 7000 7000 7000 7000
Idle torque T
012
[Nm]
Based on the drive
3.3 2.7 1.7 1.4 1.2 1.2 1.1 0.93 0.88 0.81
Torsion and forces
Maximum torsional backlash j
t
[arcmin] Standard ≤ 8 Standard ≤ 10
Maximum torsional rigidity C
t21
[arcmin] 30
Maximum axial force F
2AMax
[N]
In relation to the shaft center at the output
5650
Maximum lateral force F
2QMax
[N]
In relation to the shaft center at the output
6600
Maximum breakdown torque M
2Max
[Nm] 487
Temperature [°C]
Maximum housing temperature + 90
Ambient temperature -15 to +40
Housing
Properties Anodized; heat-treated steel
Color Anthracite gray; RAL 7016
Seal Sealed bearing disks