background image

7

THE TRAFFIC ASSIST

>>>

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

The Traffic Assist

Use

The Traffic Assist is a powerful PND
(

P

ersonal 

N

avigation 

D

evice) for use in

vehicles and closed spaces. The unit
should be protected from dampness and
dirt.

Navigation

Thanks to GPS = 

G

lobal 

P

ositioning 

S

ys-

tem, you no longer need to spend hours
searching through road atlases.
Once outside buildings, the receiver an-
tenna integrated in the unit gives you con-
tinuous access to navigational possibili-
ties. Depending on reception, you may
not be able to use the navigational func-
tion inside buildings. When used in vehi-
cles, you may not be able to adequately re-
ceive GPS data depending on how the
Traffic Assist is installed. In such cases,
you will have to connect up an external
antenna (does not fall within the scope of
supply).
The Traffic Assist is equipped with
TMC*, which gives you the option of re-
ceiving traffic announcements via the
TMC antenna provided. Traffic an-
nouncements are transmitted when the
TMC is active. The system plans an alter-
native route automatically or on request to
avoid traffic problems, depending on the
setting.

Unpacking the Traffic Assist 

Checking the delivery

Before the Traffic Assist is started up, the
delivery should be checked to ensure that
it is complete and in the correct condition
(see also page 12).

>

Carefully unpack the content of the
package and check it.

Note:

Your Traffic Assist is supplied in stable
packaging. Do not unpack the unit in full
if you discover any serious damage to the
packaging or its content. If this happens,
please contact your local stockist.

*Applies only to the Traffic Assist Z 099

Содержание Traffic Assist Z 098




















































































Отзывы: