Becker TRAFFIC ASSIST PRO 7929, Руководство по эксплуатации

Страница: 58 / 84

58
Navigational mode
Using TMC
Once you have connected the TMC
antenna, your Traffic Assist Pro will
receive current traffic announcements
and dynamic route calculation will be
enabled (traffic jam diversion). You can
also view traffic announcements
directly.
To preset the TMC, See "The TMC
button" on page 55.
!
Press the map on the map display.
! Press the
TMC
button.
All current traffic announcements are
displayed.
Press the arrow buttons to the left and
right of the announcement number to
browse through the traffic
announcements.
The road number (motorway, A-road or
district roads), section of road if
applicable, traffic direction and the type
of problem are displayed in each traffic
message.
Updating the announcement list
!
To update traffic announcements,
press .
Station selection
You can select a TMC station in three
different ways: automatically or via the
station name or frequency. Press the
button at the top right of the screen to
switch between the three options.
Default setting is
Automatic tuning
.
6071
6071
6070
Setting Meaning
Automatic tu-
ning The automatic station
search is active. Select a
station using the arrow
buttons.
Hold Stations preset via
Auto-
matic tuning
or
Frequen-
cy input
are tuned in un-
til you drive out of their
reception range.
Frequency in-
put If you know the station
frequency, you can tune
into the station in this
mode using the arrow
buttons.