background image

5

!

Safety information

• The unit may only be operated if the traffic situation allows for this and if you are absolutely certain that you

yourself, your fellow passengers or other road users will not be put at risk, encumbered or disturbed by this. The
rules of applicable road traffic acts must be observed at all times. Destinations may only be input when the vehicle
is stationary.

• The navigational system is only an aid. The data/details provided may in some cases be incorrect. The driver must

always decide whether to follow the details given or not. We accept no liability for the navigational system issuing
incorrect details. As a result of traffic routing changes and deviating data, inaccurate or incorrect instructions
may be given. Drivers should always pay attention to the actual road signs and traffic control. 

I

n particular, 

t

he

navigational system cannot be used as a means of orientation in cases of poor visibility. 

• The unit may only be used for its intended purpose. The volume of the Navigationsgerätes should be set so that

noises outside the vehicle can still be heard.

• The unit should be switched off immediately if faults occur (e.g. development of smoke or smells).

• For safety reasons, the unit may only be opened by a specialist. Please contact your local stockist if you require

repairs.

Содержание TRAFFIC ASSIST PRO 7929





















































































Отзывы: