Installation
Becker Avionics
Device Assignment
24
RCU6512
DV17551.03 Issue 03 June 2020
2.1 Packaging, Transport, Storage
Visually inspect the package contents for signs of transport damage.
The packaging material is inflammable, if it is disposed of improperly by burning,
toxic fumes may develop.
Keep the packaging material and use it in the case of a return shipment. Improper or faulty packaging
may lead to transport damages.
Make sure to transport the device always in a safe manner and with the aid of applicable lifting
equipment if necessary. Do never use the electric connections for lifting. Before the transport, a clean,
level surface should be prepared to put the device on. The electric connections may not be damaged
when placing the device.
First Device Checkup
•
Do a check for signs of damages.
•
Please make sure that the indications on the type plate agree with your purchase order.
•
Make sure that the equipment is complete ("Scope of Delivery", page 24).
Storage
If you do not install the device immediately, make sure to store it in a dry and clean environment.
Make sure that the device is not stored near strong heat sources and that no metal chippings can get
into the device.
2.2 Device Assignment
This manual is valid for the devices:
•
RCU6512-(100)-( )
Upwards from Software Version:
SCI1038S305 Version 12
Scope of Delivery
•
Manual
o
Installation & Operation
•
Device as ordered.
•
Authorized Release Certificate (EASA Form 1)
State of Delivery
•
The RCU6512 is ready for use.
o
No programming procedures required.
o
Default settings see "
Additional Equipment
•
Transceiver.
•
Conn cables.
•
PTT switch.
•
Antenna.
Details see "Accessories", page 21.
