Installation
Becker Avionics
Configuration-Setup
34
RCU6512
DV17551.03 Issue 03 June 2020
2.8.1.2 RCU - Password
Display Contents
Setting of RCU parameters
Figure 12: "PASSWORD 0000"
•
The display shows "PASSWORD".
•
Use the rotary encoder to set the password.
Figure 13: "PASSWORD"
•
Insert the 4-digit code "6435" by turning and pushing the rotary
encoder (push to toggle between digits).
•
Push “STO” key to accept password.
2.8.1.3 RCU - Contrast, Dimming
Display Contents
Setting of RCU parameters
Figure 14: "CU CONTRAST"
•
The display shows "CU CONTRAST".
•
Use the rotary encoder to set contrast level.
•
Push rotary encoder push button.
Figure 15: "DIMMING_INPUT"
•
The display shows "DIMMING_INPUT".
•
Select required "DIMMING_INPUT".
o
NONE: A dimming voltage at the illumination input lines will
be ignored and "CU BRIGHTHESS" is available through
"Configuration Mode"
o
+5 VDC, +14 VDC or +28 VDC: RCU6512 illumination will be
controlled remotely by illumination input lines.
o
Maximum illumination level will be achieved for dimming
v5 V, +14 V or +28 V respectively.
•
Push "STO" key to accept selection.
•
Push rotary encoder push button.
