GT6201
_________________________________________________________________________________________
DV 17001.03 Issue 4 01/2015
Page 21
Display Contents
Description
The page “ILLUM CURVE” is displayed only if the DIMMING
input is either selected for “14V or 28V” dim-bus voltage. The
illumination curve shows the relation between dimming bus
voltage and brightness of the LCD and push-button illumination.
Two adjustable points V1 and V2 define the illumination curve.
Select the respective parameter by pushing the “STO” button
and then adjust the value in horizontal (left/right) respectively
vertical up/down) direction using the “ROTARY ENCODER”.
(1) This parameter defines the horizontal parameter V1x
(minimum values: 1.5V for 14V dimming bus and 4V for 28V
dimming bus). Up to this value the brightness is zero. When
reaching V1
x
the brightness is immediately adjusted to V1
y
.
(2) This parameter defines the vertical parameter V1y which is
the level of brightness that is set when trigger point V1
x
is
reached.
(3) This parameter defines the horizontal parameter V2x
(maximum values: 14 or 28 V depending on selected dimming
input) where the illumination curve reaches the maximum
brightness level.
(4) This parameter defines the vertical parameter V2y which is
the maximum brightness.
Note:
Menu available on primary and secondary
controller
Two options can be selected on “MEMORY OPTIONS” page. By
means of the “ROTARY ENCODER” one option can be
highlighted and enabled/ disabled by pushing the “STO” button.
CHANNEL STORE:
If this option is enabled frequencies can be stored in any of the
99 available channels.
Even if the “CHANNEL STORE” option is disabled the user has
access to previously stored “User Channels”.
STORE LAST CH
ANNEL
If this option is enabled, the device automatically stores the last
used VHF frequency in “Last Channel” database and user has a
read access to this database.
If this option is disabled the stored data in the “LAST CHANNEL”
database is not accessible.
Note:
Menu available on primary and secondary
controller