GT6201
_________________________________________________________________________________________
Page 20
DV 17001.03 Issue 4 01/2015
DEVICE INFO
CM SW VER
CH SW VER
GT SN
1.51
3.07
00169
2.7.6
VU Meter
The VU Meter allows correct adjustment of audio input sensitivity.
Display Contents
Description
VU Meter is displayed on all sensitivity setting menus, it is
located in the middle below the menu name and above the
dedicated sensitivity setting bar
It displays the current audio level value on selected audio input
(“Current audio level”) and holds the highest value of active
audio level recorded during the last 3 seconds (displayed as
“Hold max level” bar).
Correct sensitivity is achieved if most of the time, while you are
speaking normally into the microphone, the “Hold max level” bar
remains in the “Recommended range”.
2.7.7
Installation Setup Page
s - Data Description
Display Contents
Description
GT6201 “DEVICE INFO”:
After entering the “Installation Setup” the first page “DEVICE
INFO” is displayed. This page shows information about the SW
version and the serial number of the transceiver.
For GT6201 “DEVICE INFO” displays information about;
•
Transceiver SW version (GCM SW VER),
•
Controller SW version (CH SW VER),
•
GT6201 serial number (GT SN).
One of three options can be selected by turning the “ROTARY
ENCODER” to dim display illumination and push-button
background lighting. Finalize the selection by pressing “STO”
push-button.
NONE
:
The illumination for LCD and push-buttons is controlled via the
“ROTARY ENCODER” on the transceiver itself. The user can
adjust the brightness in the users menu.
The brightness of the LCD and push-button illumination can be
adjusted between 0% (off) and 100%. Select your brightness by
turning the “ROTARY ENCODER”. The BRIGHTNESS settings
can also be adjusted in the user setup menu. Users can change
the parameter at any time.
Note:
This page is displayed only if dimming input is set
to “NONE”.