Becker enocean P5-16 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Becker enocean P5-16 Скачать руководство пользователя страница 16

Deleting the limit positions

Attention

When the limit positions are deleted, all the other set functions (intermediate position I, in-

termediate position II, upper anti-freeze mechanism, obstacle detection, fly screen pro-

tection function) are deleted as well.

Deleted limit positions are displayed on the limit position status indicator.

Deleting a limit position when 2 limit positions are programmed

Put the tubular drive into programming mode.

>5s

Press a travel button for >5 seconds on a transmitter that has already been pro-
grammed in order to switch to installation mode.

▻

The tubular drive confirms

A drive command is executed when a button is pressed for more than

1 second.

Move the shading solution to the limit position that is to be deleted.

Carry out the following sequence without interruption between the individual drive commands.

until

STOP

4x

4x

<1s

Press a travel button 4 times within one second to exit the installation mode.

►

The tubular drive confirms.

Deleting both limit positions

Put the tubular drive into programming mode.

>5s

Press a travel button for >5 seconds on a transmitter that has already been pro-
grammed in order to switch to installation mode.

▻

The tubular drive confirms

A drive command is executed when a button is pressed for more than

1 second.

Open/close the shading solution to a point between the limit positions.

Carry out the following sequence without interruption between the individual drive commands.

until

STOP

4x

4x

<1s

Press a travel button 4 times within one second to exit the installation mode.

►

The tubular drive confirms.

16 - en

«
...
14
15
16
17
18
...
»

Содержание enocean P5-16





























Отзывы:

Нет отзывов